You can attach your Beeline to either your handlebars or your bike stem. If, in addition to auto-calibration, you've magnetically calibrated your Beeline, you may want to keep attaching it to the same position on your bike each time to save having to re-calibrate.
You can strap your Beeline on as shown below (don't be afraid to pull your strap to wrap it around your handlebars - it is very strong!):
To properly secure your Beeline to your handlebars, the two most important things to remember are:
1. That the Beeline must be placed horizontally on the handlebars, with the screen parallel to the ground
2. That the Beeline must be strapped on straight, with the sausage (ridge) in line with the centre of the strap.
In other words, to make sure that it can withstand all of your cycling adventures, your Beeline should be strapped on like this:
And not like this:
If you would like to change the position of your Beeline (eg. from stem to handlebar) you will need to change the orientation of the device screen. Click here to find out how